Titebond Melamine Glue is designed for bonding wood, particleboard, MDF and other porous substrates to synthetic materials such as melamine, vinyl and HPL as well as metals. It offers a fast initial tack, yet has a longer open time that allows for the accurate alignment of working materials. Titebond Melamine Glue is a water-based adhesive that is nonflammable, has low odor, dries clear and cleans up with water. Its thicker formulation offers fewer runs and drips, making it easier to use and more effective for precise assemblies.

• Application Temperature: Above 4°C
• Duration during which you can manipulate and assemble the glued parts before the adhesive fully cures or sets: 5 minutes (21°C @ 50% relative humidity)
• Total assembly time: 10-15 minutes (21°C @ 50% relative humidity)
• Required clamping pressure: Enough to bring joints tightly together (generally, 30-80 psi for HPL,100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods)
• Method of application: From the plastic bottles for fine applications; glue may also be spread with a roller spreader or brush.
• Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess glue.
• Limitations: Titebond Melamine Glue is not intended for exterior use or where moisture is likely. Not for structural or load bearing applications. Vacuum pressing should only be used for veneers up to 1.5 mm in thickness. Do not use when temperature, glue or materials are below 4°C. If product has been frozen (gel-like appearance), it cannot be used. KEEP FROM FREEZING. KEEP OUT OF REACH OF CHILDREN.
• Type: Specialized vinyl acetate emulsion
• Calculated volatile organic compounds: 77 g/L
• State: Liquid
• Color: White
• Dried film: Clear
• Flashpoint: > 93.3°C
• Solids: 57%
• Viscosity: 12000 cps
• PH: 4.0
• Optimal temperature: To assure a good bond, 4°C is the lowest recommended temperature of the glue, air and materials during application.
• Storage life: 24 months in tightly closed containers around 23.8°C